“Hiding Hibiscus” Post War Peplum Set

The sun is now setting sooner and the leaves are just beginning to show some vibrant color, but that doesn’t mean a girl like me can’t take advantage of the lingering warm fall weather to dream of being somewhere more perpetually balmy!  I’ll just wear some fall color in the late 40’s Hawaiian style to reconcile myself with the now fading summer!

This outfit of me-made blouse, skirt, and belt was directly inspired by an outfit worn by the character of Ana Jarvis, from Season Two of Marvel’s TV show Agent Carter.  However, it was also a very good opportunity to experiment with more new-to-me fashion trends – peplums and scallop edging.  I have  seen both peplums and scalloping in many sources for this coming fall, especially scallop edging (check out Talbots, Valentino, Zara, and Nordstrom for some higher-end starters).  I also see this feature everywhere in post WWII 40’s fashion until the early 1950’s (see my Pinterest board on this for examples).  This scalloping is an easy and exciting detail that the home seamstress or anyone who sews can incorporate into any and all existing patterns.  I will show you later on in this post.  As for the peplum of the blouse I am wearing, this was a total dive into something I’ve always been dubious about as to whether or not it could be made to “work” for me.  I believe it does, thanks in no small part to my awesome custom made belt, and I am now a peplum convert.  The best part is the fact I have put a completely new spin on a popular Simplicity vintage re-print, #1590.

A post 1946 to pre-1955 peplum is my favorite interpretation of this style – so far!  I love the bias circle flare.  Peplums from this time slot were sort of like a balancing act of offering what was missing from the peplums of the preceding and following eras.  Peplums of the 30’s were long and lean or short and almost non-existent, during the war years of the 40’s, there were short and frilly peplums, and the 50’s had padded, flared, or deceptively unreal inflated hips. I see post WWII to early 50’s peplums as a subtle transition to more accentuation of the hips, a classic trademark of after the mid 50’s, rather than an exaggerating emphasis on the shoulders as fashion had been doing since the mid 1930’s.  Case in point, Simplicity released an almost identical peplum blouse pattern (with a different neckline and sleeves, granted) in the year 1955 as Simplicity #1344.  The Simplicity reprint I used for my blouse was originally Simplicity #2027, from the year 1947.  Peplums nowadays are fun and varied – they experiment with anything and everything in between…long, short, half, bias, paneled.  Have you learned to love peplums yet?

Speaking of what I love, it’s no secret (if you follow my blog) how much I adore the fashions on Agent Carter (both seasons), and I had to branch out and try more of the fashion of the indomitable wife of Mr. Jarvis.  (Here’s my first and second Mrs. Jarvis outfits.)  Ana Jarvis’ personal style was strongly Hawaiian, with some Tyrolean influence of the late 30’s as well, so I figured on going for “the real thing” if I was to channel her and be authentically true to both the 40’s and the island culture.  Kamehameha, the largest commercial manufacturer of Hawaiian garments, began in 1937 using tropical floral cotton prints from a dominion of the United States rather than importing Japanese textiles.  After WWII, when tourists again flocked to the islands, the Hawaiian garment industry flourished (info from Forties Fashion by Jonathan Walford).

I have used tropical and Hawaiian prints before, but they have been rayon printed imports (see here and here).  The Hawaiian garment industry still deserves to flourish and be respected for their individual culture as an important part of America’s history.  That’s why the fabric for my skirt was ordered directly from the island of Hawaii!  Yes, I ordered it direct from “Barkcloth Hawaii” and it is so soft and luxurious, in excellent quality.  Besides, I knew the fabric was meant for a Mrs. Jarvis outfit when I saw the fabric that was the closest match to the movie skirt was named “Ana” and a vintage print!  Some projects are just meant to be.

THE FACTS:

FABRIC:  The skirt is a 100% cotton sateen bought from “Barkcloth Hawaii” online, while the blouse is a basic 100% cotton, American made, bought from Jo Ann’s.  My belt is light grey vinyl also bought as a remnant from Jo Ann’s.

PATTERNS:  My skirt and belt were self-drafted by me, while the blouse top was made using Simplicity #1590, a year 2013 re-issue of a year 1947 pattern, #2027.

NOTIONS:  I used everything that was already on hand to make this set – I had all the thread, bias tape, hook-n-eyes, and everything.  I bought a big pack of metal eyelets a while back for corset and belt making (like this one), so two more were not a problem!  The belt’s ties are actually 3 mm macramé cord…I bought a large spool of 50 yards of this stuff.  (It’s great for making one’s own piping, fyi!)  The skirt’s side zipper is a vintage metal one, but the blouse’s closure is a modern 22’’. 

TIME TO COMPLETE:  The skirt was made in about an hour, and the belt took me about 1 ½ hours.  The blouse was made in about 5 hours.  Everything was made in July 2017.

THE INSIDES:  For the skirt, selvedge edges are along the side seams, and the rest are bias bound.  For the blouse, most all of the seams are bias bound, too, but the side and peplum dart seam are merely edge stitched raw.  The belt is double layered, so it’s self-faced.

TOTAL COST:  The fabric for the Hawaiian fabric cost just under $30, the fabric for the blouse cost about $12 from Jo Ann’s, and the belt was a remnant which was about $8.  Thus this outfit cost me about $50.

Making this set was really pretty easy, no matter what it looks like!  It was just time consuming to make all three pieces and a bit overwhelming to remember all the self-drafting intricacies and adaptations I was doing.  I made the skirt first, and found that if goes with a number of my already existing tops – oh yeah!  Then I made the blouse, and I felt like it was okay, but not striking me immediately as awesome as I’d hoped.  After the third step, making the belt, the whole outfit was instantly brought together in a way that I LOVED!  It made all the extra effort to make a whole outfit so worthwhile.  This happens frequently for me, most recently with this 1914 set.  So often an outfit or even just a garment a missing a certain “something” to turn it from “meh” to “Wow!”  This is why taking that extra effort to make that little detail or bonus piece pays off.  Your outfit can give you the opportunity to respond to others with, “Thank you, I made this!”, best modern fast fashion by your individuality, and make you feel like a million!

Starting in the order they were made, the skirt began with only 2 yards of fabric.  I cut the length into two one yard cuts, and sewed the seams up on the sides along the selvedge.  Then, I folded along the same spot along the other side of the “stripe” just where the floral section begins.  The center front is an inverted box pleat, while the center back is an outward box pleat.  The rest of the skirt is shaped of knife pleats that go in the direction toward the centers.  This free form pleating, while making consistent folds, was brain blowing and took a tad over an hour to achieve…fold, pin, think, then take it apart and fold, pin, and think some more about sums it up.  Completed, the center back and front pleats were top-stitched down for 5 inches down from the waist, while the rest where left free.    From authentic images of some pleated 40’s skirts, and someone I know that has researched the decade well, I was told that folding a vertically directional print like this is quite historically authentic, besides being fun and making it relatively easy to be consistent.  Fashion in to 40’s had some truly inventive “peek-a-boo” fun when pleating with stripes and directional prints…here are hibiscus flowers hiding behind hanging branches of bougainvillea on my skirt!

As it turned out, the two yards folded the way I liked just barely fit me…I couldn’t have cut it any closer.  This left me with no extra fabric for a waistband like I originally intended.  I suppose I could have cut the waist band off the skirt below, because there is a very wide 8 inch hem along the bottom.  The wide hem helps to weigh down the poufy skirt, though, as does ironing the pleats.  I didn’t really want a contrast waistband, either, so a sewing friend recommended none at all!  A wide strip of bias tape was stitched on the top waist and turned under.  This waist makes it hard to tuck in a top and wear a belt, but I can’t win ‘em all!  For this outfit, the waist is not seen anyway.  I also ended adding in small 7 inch zipper along the left side, as well, with a hook-n-eye that attaches the pleats to one another from the inside.

The blouse was a real breeze to whip up, and had excellent fit and construction.  It’s no wonder this pattern has been in print for a while and is used by so many!  This blouse really is a winner.  I absolutely love the flat front peplum with its interesting capitol T made of a combo dart and seam lines!  The peplum is slightly longer in the back than it is in the front.  I made my “usual” size in Simplicity for the front half and the back I went a size up for ‘’reach room”.  Otherwise, believe it or not, I really didn’t change anything else besides cutting the center front on the fold rather than with a button placket, adding a zipper (with a seam) down the back center, and stitching the sleeve and neckline edge differently.

I started making the neckline and sleeve edges by originally cutting them out as a straight edge.  Then I drafted my own wide facings for the neck and sleeves and drew out the scallops with an invisible ink pen.  Ana Jarvis’s original blouse had wide, deep, dramatic scallops, and I even counted out six around the front neckline, one straddling the kimono shoulder seam, and about 6 for the back neckline.  The only item that I had on hand to use as a tracing guide which would equal the amount of scallops on the original was what I use for pattern weights… ¾ inch washer (which you can find in the hardware store).  Using only half of a washer to make each scallop, with ½ inch in between each, made for two inch wide, 1 inch deep half circles.  The scallops are just a tad smaller where the seams are, so my experiment turned out “perfect” (…what I was hoping for…) but still more amazing than I’d hoped.

If I learned anything to change next time for self-drafting this kind of edge, it’s that the scallops might lay better if they had been made shallower than a complete half circle, but large scale looks good on this blouse in the end, I believe.  I also learned the facing for scallops turns inside easily and keeps its original stitched shape if the seam allowance is trimmed to ¼ inch or less.  This sort of adaptation can be done to any plain edge or even seam line, on any pattern, too.  Just make sure to be precise and remember the seam lines if the scallops straddle them dead center.  Then go to it with adding scallops anywhere!

The belt was basically a wider draft off of this belt which I made for my Agent Carter “Hollywood Ending” dress.  It is merely two layers of vinyl with no interfacing.  The toughest part was hands down turning the two layers of vinyl right sides out after it had been mostly stitched up into a long tube…pure torture.  Never do this unless you sew wax paper inside…this would’ve helped the vinyl from sticking like glue to itself when trying really hard to turn right sides out.  After about a 45 minute “fight” turning the vinyl’s good side out and edges rolled out, the whole darn thing was then top stitched down ¼ away from the edge and two metal eyelets in the center edges.  Add the ties, finish the cut ends, and all is done!

As ecstatic as I am with this outfit, the episode from which this outfit comes is admittedly a very tense, tragic, and sad one.  Ana Jarvis wears this blouse, skirt, and belt set for the whole of Season Two’s episode 7, “Monsters”.  This luckily gave me the best chance to study and re-make versus many garments (from several characters) that get seen in short snippets.

I am impressed and happy that (as has happened before) Marvel’s Agent Carter series has help me enjoy a new-to-me, completely different style and silhouette of the 1940s and early 50s and make it work for myself.  No doubt it helps me like it when I know I can wear something as seen on the screens, straight from Hollywood, and be true to the era!  Besides, now I have a little (very little) part of Hawaii to bring into my life, no matter where I live or what the season.

Save

Save

Save

Save

Save

Advertisements

’73 Coat-style Shirt Dress, a Turtle, and a Belt

This is a complimentary layered outfit of three pieces, working together as an effortless way to stay warm in the cold a la early 70’s style.  Three of the major pattern companies contributed towards my outfit – Simplicity, Burda Style, and Vogue – to spread out my contributing sources.

dsc_0998a-compw

This is also one of those fun oxymoron outfits where I find alternative ways to wear garments taken for granted…my shirt dress is actually worn like it’s a coat.  It is a heavy denim, flowered and all.  It’s like I’m bringing the flowers from out of season to the sleeping winter landscape.  My turtle neck top is not at all dated but actually quite enticingly fashionable, and it’s neither fit on its own for the very cold temps, mostly just a perfect layering piece, especially with its short sleeves.  The jeans were made by me as well, from a pattern of a different era (blogged about in a separate post here).  I can even eliminate the extra layers underneath and wear the shirt dress with my vintage 70’s heels and a neutral belt for a dressy outfit at the other end of the spectrum (seen down later).  Yeah, I love to mix things up and break boundaries – a least a bit when it comes to the clothes I make!

dsc_1014a-compw

This outfit is made for Allie J’s “Social Sew” for the month of January 2017 “New Year, New Wardrobe”.  There isn’t much I intend to change for this coming year’s sewing, social-sew-2017-badgebesides filling in new dates of historical sewing (teens era, and early 20’s), and continuing to try new techniques and having fun doing unique and meaningful outfits (loose resolutions, I suppose).  I feel that this outfit applies to the monthly theme because the dress was a U.F.O. (unfinished object) as of 2016 fall, and I was starting new tackling it and finishing it so as to be happy with it.  This outfit further applies to the monthly challenge because I have been meaning to make these items for a while, like since 2014 for the dress and turtle.  70’s style is still “in” so I guess there’s no time like now to just get around to a long intended project.

THE FACTS:simplicity-5909-yr-1973

FABRIC:  The Dress:  a cotton floral denim which may have a hint of spandex; The Turtleneck: a lightweight polyester jersey in a blue navy, leftover from my 1971 “Bond girl” dress; The Belt: a thin jersey backed vinyl, grooved and a bit weathered like a skin, in a cherry red cranberry color

PATTERNS:  The Dress: Simplicity #5909, year 1973; The Turtleneck: Burda Style #114 A, from December 2014, online or in their monthly magazine; The belt: Vogue #9222, from 2016, View vogue-9222-year-2016Eburda-style-turtleneck-114-a-dec-2014-line-drawing

NOTIONS:  I had (believe it or not) everything I needed to finish all this on hand already without needing to buy more than an extra spool of tan thread.  I used three different colors of bias tape (whatever was on hand), used a vintage metal zipper for the back of the turtleneck, and used vintage buttons and the belt buckle from hubby’s Grandmother’s stash.dsc_1033a-compw

TIME TO COMPLETE:  The dress was halfway made in October and November of 2016, and completed this year, finished on January 20, 2017.  I’m guess-timating a total time of about 25 hours spend on the dress.  The belt was made on October 21, 2016 in only 3 hours, and the turtle top was made one night the week after that in about 3 hours, as well.

THE INSIDES:  The dress is nice inside with bias binding, the top is left raw for the inside edges, while the belt has cut raw edges, too, finished off in my own special way (addressed down below)

TOTAL COST:  The vinyl was a remnant bought on double discount at Jo Ann’s Fabric store – a total of about $4 for one yard, so there’s plenty left over for a purse, yay!  The other fabrics were something on hand for so long I’m counting them as free.  Thus, between the vinyl and the thread, this outfit cost me about $6.  Sorry, allow me to pat myself on the back for this one.

I am so, so happy to have finally found a use for this floral denim.  It had been in my mom’s fabric stash since I can remember, then she gave it to me for my stash and I had no intention or even remote idea of what to do with it for so many years.  There were 4 freaking yards of this dated-looking flowered denim that could be from the 80’s for all I know.  So when I happened to notice my Simplicity #5909 1973 pattern having a similar looking fabric, I was sold.  Choosing the ankle-length, long-sleeve option was a give-in to use up all of the bolt, as well.  I might have been taking an easy road to follow an existing drawing, but – hey, at least I found a use for what seemed doomed to be an ugly duckling in my fabric stash!

dsc_1001a-compw

Making the shirt dress was technically not hard – it fits me great out of the envelope with no real fitting.  What was difficult about it was dealing with the large amount of such a heavy fabric.  Marking all those pleats and buttons all the way down was exhausting.  Besides, the stitching required to sew this fabric hog together was boring, straight, and monotonous, especially when it came to the long side seams.  Just trying to stitch on it was its own problem.  Half of the time it took me to stitch was I think spent throwing and pushing around fabric so as to even get it laid out right just to sew on it.  I’m not meaning to complain, just wanting to throw this fact out to anyone who is thinking of making a 4 yard denim shirt dress, too – you’ve been warned what you’re in for.  Like I say, though, it’s worth it in the end.

I’m loving the features of the shirt dress.  Of course it has the large collar lapels that are so traditional on 70’s clothes, but this collar also has an all-in-one collar stand.  There are separate chest front and back shoulder panels which keep the upper bodice flat, without the pleats of the bottom 2/3 of the dress.  There are long horizontal knife pleats in pairs all the way down the hem, four in both front and in back.  The extra wide cuffs have a lovely double button closure, with a continuous lap opening (for which I merely used pre-made bias tape rather than self-fabric).  A baker’s dozen of camel-colored vintage buttons complete it.

dsc_1045-compw

This dress pattern’s long version was definitely designed for a woman with weird proportions – tall women with petite length arms.  I am about 5’3” and I had to do a 4 ½ inch hem to have it fall at my ankles.  However, the sleeves were so short, and I had to add one extra inch in length to make them appropriate for my arms (and my arms are a ‘normal’ length, not petite).

The denim is soft with the little bit of stretch, but still heavy, so in lieu of interfacing I chose only to use a medium weight, non-stretch 100% cotton.  It stabilizes the cuffs, collar, and upper back and front bodice panels with making them stiff.  I do have to laugh at how much of a rustle my dress makes when I move.  The fabric is not a heavy of a denim as my husband’s Levi jeans, but it sure does make a heavy, sort of muffled static “white noise”.  Definitely not the best dress for sneaky espionage work…no possibilities of quiet stealthiness in my denim coat-dress. I’m just doing some silly reflection.  It is a great winter dress!  Someone that recently gave me a compliment on my outfit commented that you just can’t find anything like this to buy – yes, that’s why I sew!burda-style-turtleneck-114-b-dec-2014-model-shot

The other great chill buster that keeps me cozy is my lightweight turtleneck top.  I figured the turtle pattern would work well with my 70’s dress because the Burda model picture looks very late 60’s with the equestrian-style helmet/hat, her long hair, and A-line pleated skirt.

This was so ridiculously easy to make I couldn’t stop voicing my amazement for a while after I finished – just a few hours and voila!  Of course, my top was made up more quickly without having the full long sleeves, but even still this is a great pattern.  I barely had a yard of the interlock knit leftover and I was able to make this!?  I’m so tempted to whip up a dozen of these turtles in every variety – quilted knit, sweater fabric, sheer fancy stuff, and more especially I’m hoping to find a funky printed knit for a true Space Age look to go with my ’67 jumper.

dsc_1036a-compw

The long sleeves are something I do love, but they have more of a 1930’s look so I might end up using them as a replacement on an old-style elegant Art Deco dress in the future.  I will say the body runs small – I almost wish I had went up a size…but hubby’s happiness with how it looks on me makes me say, “Nah, I picked the right fit…”

dsc_1027a-compwThe back neck exposed zipper is sort of mixed feelings sort of thing for me.  I love the modern way it looks even though it is a vintage 50’s or 40’s era notion.  I do not enjoy how it almost always gets caught up with my hair even though I close the zip with my head upside down so my hair isn’t in the way.  Oh well, win some, loose some – I cannot think of a better solution so I’ll shut up about it.  Hint, hint – when in an adventurous mood, you can even wear the back neck unzipped and the stand-up collar lays flat on the chest for a completely different appearance to the top!  O.K., now I’ll move on.

Another amazing thing to this outfit is the belt.  Look at that asymmetric loveliness!  It’s freaking awesome.  I look at it and can’t believe I made it, it seems so professional.  This is a really great design and it has wonderful shaping for around the waist – this is not a straight rectangle sort of pattern.  Belts might seem hard to make or even mysteriously different and even intimidating (working with vinyl or leather), but all of that is blown away by using Vogue #9222.  The instructions are clear and all the designs are so neat I intend to make all of the views available.  In your face ready-to-wear, store bought belts…I can make something better than you, you are often only half belts, with elastic across the back.  My belt is all belt, 100% my style and my make!

DSC_1010a-comp,w.jpg

My only caveat is that I wish I had extended the length of the belt to go up to the next size.  Cutting out a paper pattern on a slick vinyl leaves room for shifting and a small margin of error.  In order to get the two belt pieces matching together, I had to trim them down slightly, and thus I ended up with a belt that was a little smaller than the pattern intended.  This is why I recommend adding an extra 4 or so inches to the belt length going around the waist.  You can always cut some off, but you can’t add it on, especially when it comes to vinyl.dsc_0002a-compw

I was able to machine stitch most all of the belt, but I used a tiny ‘sharps’ sewing needle to hand sew on the buckle and the belt loop.  I did not want to test four layers of vinyl on my machine so I did not fold in the edges of the seam allowance.  I left the edges raw and tried something experimental.  Taking a hint from store bought belts, which have some sort of seal along the raw edges, I used a matching colored nail polish (yes, fingernail lacquer) to paint over the edges of my belt, both coloring and sealing them at the same time.  It’s a rather permanent option, nevertheless I did see some faint rubbing off of the nail polish onto my dress after one wearing.  So – it’s not perfect, but an easily available solution that I am happy to see worked out so well.

This was the first time making grommet eyelets and I think they are a success.  I have tried before again and again to get metal grommets to turn out right, but that was experimenting on fabric (for a corset) and this time they came out much better in the vinyl.  It was like a boost of confidence I needed, feeling that ‘o.k. I can do grommets, I understand how they work now’ so maybe, eventually I can have them turn out well for my future corset.  Does anyone have any tips to share about the keys to successful metal grommets or even what to avoid?  Should I add some glue to the back (to keep them in place) and can you replace one if it gets wonky (or does that not work)?  Just wondering.

dsc_1041a-compwI hope this post has inspired you to see outside of the traditional box for sewing and making every day-type of clothing items.  There is so much room for inventiveness when you make things yourself, the sky’s the limit!  A dress that is a shirt-dress worn like a coat, a belt finished-off with nail polish…a girl’s gotta do what she has to do when she gets an idea with a sewing machine, some material, and extra time on her hands!  Yup, I live on creativity and can’t stop.

Do you, too, have any big hopes for making some neat things this year, something which gets you all amped up just to think about it?  Do you too have some ‘ugly duckling’ fabric around just waiting for the ‘right partner’ in the form of a pattern to complete it (or did you ditch it)?  What is your favorite way to put yourself together to combat the cold weather?

Save

Save

Save