London Logo Plaid

As this is a follow-up to my Disney-inspired Pocahontas outfit, made for my “Pandemic Princess” series, it is aptly tied to the songs from the 1998 sequel “Journey to a New World”. To Pocahontas in the sequel, that new world is Britain, specifically London – “What a Day in London” song.  With her visit (following her marriage to John Rolfe in real life), her history became even more deeply linked to both Britain and America – “Between Two Worlds” song. I couldn’t think of a more glaringly ironic match (in many ways I will address later on in this post) than for me to make a trench-style coat made of cheap but iconic English Burberry plaid fleece.  Yet, the logo plaid must not have been out of place in the forest as a wild deer was photo bombing me throughout, totally edging in on my spotlight – “Things Are Not What They Appear” song.  Beyond adding a watermark, these are real, unaltered pictures!  How can I brag about my coat when the deer has an even prettier, more useful one on her back?!?

This was yet another one of my many remnant stash-busting projects.  I only had one yard of Burberry plaid fleece, half a yard of black fleece, and leftovers from other projects to help me finish this one off.  Yay for a smart use of fleece, the fabric I love to hate, in a print I very much enjoy!  This coat is a very versatile and a breathable weight of warmth.  It was a quick undertaking which ended up looking much better than I imaged it might.  My projects which use up scraps really make me inventive in a way for which I am proud.  In conjunction with that incentive, my “Pandemic Princess” series is also inspiring me push my Disney dreams farther than just one outfit per leading lady.  Oh, what have I started!

THE FACTS:

FABRIC: the exterior black and Burberry plaid fabrics are polyester fleece, the inside lining is burgundy polyester crepe (leftover from sewing this 1930s lounging robe), the inner layer is pre-quilted cotton covered batting, and the under collar together with the front facings are cotton sateen

PATTERN:  Simplicity #1320, year 2014

NOTIONS:  I had everything I needed on hand already – interfacing, a few buttons (ornate brass ones, leftover from this historical skirt), and lots upon lots of thread.

TIME TO COMPLETE:  This coat took me about 25 hours to make.  It was finished on February 19, 2021.

THE INSIDES:  any raw edges inside are cleanly concealed by the full lining.

TOTAL COST:  As I have had the two fleece remnants on hand for the last 10 years, and the all other supplies were leftover from past projects, I’m counting this coat as free!!!

The prestigious Burberry Company began in 1856, but found its home in London by 1891 when Thomas Burberry opened a shop in London’s West End.  Thomas Burberry is credited invented and patenting gabardine in 1888 – the breathable, weatherproof and hard-wearing fabric revolutionizing rainwear – which up until then had typically been heavy and uncomfortable to wear.  Then, its fine, waterproof outerwear happened to make the term “trench coat” an anchor in fashion history by having an adapted version of his “Tielocken coat” the standard issue for officers during World War I.  The recognizable Burberry logo plaid was then introduced in the 1920s.  Afterwards, in the 70’s and 80’s, the brand’s tartan print suddenly was no longer solely worn inside their garments as a lining when it turned into a preppy U.K. elite symbol (aka, the “Sloane Rangers”).  It became a visible status symbol.  Yet by the next decade, it was also one of the most widely counterfeited brands of the turn into the 21st century.  Over the years, Burberry has evolved and today it’s much more of a lifestyle brand that you can see on catwalks and fashion shows – no longer just known for making a trench coat.

British soap opera star Daniella Westbrook in that infamous head-to-toe Burberry outfit of 2002

In the late Nineties, the Burberry print began a trendy revival courtesy of the “logo wave”, which was all about sporting Gucci belts to Chanel bags and Louis Vuitton wallets.  As a teen at that time, I was one of the biggest fans of the tacky, over-the-top usage of the knocked-off Burberry tartan on anything under the sun.  (Oh, what was I thinking!?!)  Now, I am much more restrained but still enamored by the fashion plaid print.  All I ever bought of the Burberry brand as a teen was an expensive Pashmina Burberry neck scarf at a fine retailer and the brand’s classic eau de toilette.  Now, I am breaking out of that shell by making of this coat.  I’m returning back to my teenage fascination and half reliving something I never got to do growing up…only half because this is not a true, trademarked Burberry material.    

I am not one for brand flourishing myself – of course not, when I sew my own clothes.  Yet, a Burberry plaid is my long restrained weakness.  At the same time, however, it is so gaudy in my mind that I never knew what to do with it or how to pair together with a pattern.  I figured to tone it down with a darker contrast remnant on hand and – even though both cuts are only cheap fleece – treat them like a finer coat fabric to hopefully end up with something which might not be tacky.  At least the coat turned out better than I expected while being nicely tailored and cozy warm!  This was a successful experiment and yet also a weird one to see finalized after all these years.

I sort of blended the lines between a trench and an over coat, just for practical purposes. A trench coat is designed to protect you against rain while an overcoat is designed to protect you against the cold. A trench coat is lightweight while an overcoat is heavyweight.  For my coat, the fleece outside is fluffy polyester, so it really doesn’t get wet easily even though it is not waterproof.  I tested this truth out later the night of our pictures when I played in our son’s snow fort, which was beginning to melt.  I stayed warm and dry and most of the wet snow either rolled off or could be brushed off of me.  Usually one has to layer up to be warm in a trench coat because it is merely supposed to be waterproof appropriate gear for all seasons.  Yet, I am a person sensitive to the cold so I upped the game on my version with the cozy quilted cotton layer between the exterior fleece and polyester lining.  It is a coat which is in between lightweight and heavyweight, as all materials are pretty lofty load individually. 

This is still double-breasted like a proper trench coat, with a large stormproof collar that can be turned up enough to completely protect most of my face from the elements, if I so need.  However, my coat’s collar is wonderfully modern in the way it is asymmetric and the tailored princess seams and color blocking reflects the new fitting and color options which the new Burberry line has to offer.  The length of a trench coat is traditionally to just below the knee. However, nowadays one can find trench coats in various lengths: full, knee, three-quarters and short.  So I suppose I can call this a very personalized, updated version of a 90’s Burberry inspired trench coat.

Amazingly, this was a very easy coat to make, even with complicating the construction by fully lining and layering it.   There are no darts, no chalk markings to make, and every seam is straightforward with first rate shaping drawn into the seam lines.  The fit was spot on, too.  I went up one whole size because I was planning on adding extra layers into the coat and that was to right move.  I have full and unrestrained freedom of movement.  More or less, I cut out 3 whole coats – fleece, quilted cotton inner layer, and lining poly – so I was happy the two pieces for the front (doubled into four) and two pieces for the back (double cut sides with one center on the fold) were simple.  The facings and the under collar had sew-in interfacing to back them up as they were a thinner material in key areas which got double-breasted and needed structural support. 

I did sew each layer to the coat separately, but hand tacked the quilted cotton inners to the eternal fleece plaid along their matching seam lines “in the ditch” to eliminate shifting of the layers.  It was important remember to shorten the sleeves and the bottom hem of the quilted inner layer by cutting off 1 ½ inches.  It is very difficult and bulky to hem quilted cotton and thus I wanted to account for the turn-under hemming to the fleece and lining only.  I also had to make the seam allowances ¾ inch to the quilted cotton and poly lining so the inner layer fits inside as slightly smaller than the eternal coat layer.  I found out some these tricks of how to work with pre-quilted cotton material (as well as how breathable but pleasantly warm it can be) as I made this 1940s jerkin vest for our trip to Denver, Colorado back in 2019.  I also knew from making this 60’s cocoon coat how shifty fleece could be when you try to sew it into something structured.  So, I combined both of what I learned from two separate winter past projects into this newest, latest, dare I say, just about the best coat I have finished so far.   

I like the unusual and slightly easier route of making handmade chain stitched thread loops along the right front closing edge in lieu of buttonholes.  The fact it is black on black color along the front is the only way I like this feature, otherwise I think thread loops would be too weirdly obvious.  The instructions called for fabric loops.  However, I know how those sort of things are fussy to add in a seam and more often than not pull out of a seam anyway if not anchored to a base of some sort (seam tape, bias strip, etc.) along the seam allowance.  I used heavy upholstery thread for making my coat’s thread loops and attached the loop bases to the interfacing inside the coat edge, so these closures are definitely stable. 

For some weird reason, my last Pocahontas inspired outfit finally gave me a decent idea as to what to do with long hoarded, one yard remnant of Burberry looking fleece.  Luckily, I was able to sew it together quickly enough to take advantage of the same photo shoot against the breathtaking backdrop of my favorite creek after the most recent snowstorm.  This coat’s earthy colors pair nicely with my Pocahontas separates (in the previous post), but also work well as an item from the era of the release dates to the Disney films.  All the elements I desired for this project were fulfilled, only Pocahontas’ Disney story is the opposite of everything this logo plaid stands for.  At the same time, it suits her aesthetic so well at the same time.  Let me explain.

I like using irony to drive home a point.  Pairing an overworked fashion print with the raw, pure beauty of nature is amusingly contrary enough.  Yet, modern fashion is synonymous with the throwaway culture severely detrimental to our world of today, threatening the very existence of living things, and fleece is one of worst offenders being a petroleum-based product which will not break down.  Thus, I only use fleece when I do because it is already on hand in my stash from before I became more conscious of the environmental impact of what we wear.  For many years now, fleece is something I will not buy and love to generally hate (ugh, plastics).  However, I am a firm believer in making use of what one has, and doing that effort well enough so that item lasts.  I believe this is the most sensible thing to do with questionable products such as fleece.

Hopefully what I have done here would be Pocahontas approved if she knew where I was coming from with my reasoning.  It does have colors I believe she would like – after all, a deer I met out in the wild didn’t seem to mind one bit!!

“For whether we are white or copper skinned
We need to sing with all the voices of the mountains…

You can own the Earth and still
All you’ll own is Earth until
You can paint with all the colors of the wind”

“Retro Forward” Burda Style: Kimono Jacket

Why is it that the nicer or the more unusual the fabric is, the more pressure there is to choose the perfect pattern to make something of it?  Sometimes this pressure can sadly prevent me from getting around to sewing projects I would want to pick up immediately!  At the same time, I do try (unsuccessfully at times) to avoid the stereotype pitfalls (such as copying the envelope cover, for one) and stay creative with my makes…true to my own tastes and ideas.  However, I cannot resist some killer vintage inspiration!  This perhaps sort of explains why I made the quick and sudden decision to use a very special and unusual rayon fabric to make a somewhat simple, unfitted, unlined jacket.  Sewing this had went against my normal practices for my sewing, but I love the outcome.

This jacket amazes me by the way I went from each end of the emotional perspective from its beginning being sewn to the final photo shoot.  I started out as very skeptical of the pattern and rather dismissive to the fact that it vaguely appealed to me, only because the sizing was for tall women (which is definitely not me).  Then, finding a Burda Style contest became the other enticement to try this pattern.

After the jacket was done (in one evening, mind you!), however, I was disappointed when trying it on.  Not that it didn’t fit and turn out great – I was tired, it was a late night, and didn’t know what to pair it with, nor did I know if it looked complimentary on me.  After a good night’s rest and a new perspective the next day, I happily found several neat combinations my jacket can be paired with (in this post, a “White House, Black Market” strapless brocade dress is worn underneath).  I finally felt justified for my time, effort, and sacrificing of my precious fabric with my going out on a ledge here.  Besides, I am still trying to have a good relationship in completely liking and understanding peplums, and how they do work on me.  This was like an “I’m getting to know you, peplum” project.  Now, I am actually a bit frustrated in a good way because I love my new jacket and want to find occasions and opportunities to wear it.  This is a good problem, though, I suppose!  Can’t let a new favorite just hang lonely in my closet, now can I?!  Especially not when it’s made of fabric like this!  (Pictures don’t do it justice, by the way.)

THE FACTS:

FABRIC:  A 100% rayon, with a slight, soft, crushed wrinkle throughout.  It also has a dull metallic (like an oil slick kind of sheen) finish on one side with a crepe-like matte finish on the other.

NOTIONS:  I had the thread, elastic, and hook-and eyes needed on hand already.

PATTERN:  Burda Style “Short Sleeve Jacket with Plunging Neckline, #107, 04/2015“

TIME TO COMPLETE:  I only spent about 4 hours to whip this jacket together, not counting taking care of the pattern (tracing and re-grading).  It was finished on July 29, 2015.

TOTAL COST:  This fabric was bought on deep clearance when my favorite Hancock Fabric store was closing.  I bought 2 yards of this fine specialty fabric for only about $5.

The pattern for this jacket can be found in their May 2015 magazine, on the insert page for tracing out or at their online store as a buy-and-download printable PDF file.   It was originally part of the “Design Academy“ Collection” (one of my favorite Burda pattern collections! I have made 4 of them…), but then it was up for everyone to try and make to have a chance to be the new “cover” in their “2nd Ultimate Member Model Challenge”.  If you visit the page for the jacket pattern, you can see that I didn’t win.  Nevertheless, I have my own prize…I was prompted to make something I would definitely not have tried on my own gumption, something that I am glad I have to wear after all is stitched and written!

It is a pattern made in tall sizing, which is one reason why I dismissed it at first as I mentioned above.  However, I figured out the proportions for tall as compared to myself looking over their measurements chart and suddenly the sizing made sense.  What I needed to do was the opposite of the up-grading I’ve done for juniors’ designs – I add in 2 inches between the shoulders and waist for petite and juniors’ patterns so this tall ladies’ pattern needed 2 inches taken out instead, between the same spots.  Folding out one inch at a time in two different horizontal segments did the trick, at the chest and just above the waist.  I did also lengthen the peplum by about two inches as well so I would avoid having it too short to completely cover my hips.  I didn’t want the peplum to pouf out awkwardly, but it’s still so gathered, in the back of my mind, I secretly wonder if it really sticks out like some sort of ballet tutu anyway (so I think in the back of my mind).

Styling can be deceiving, but this is a ridiculously simple and easy to make jacket.  It is unlined, and there are only 4 major pieces to use.  The lapels are all-in-one with the front and only an easy facing finishes it off (I used the matte side for a cool contrast).  There is no expert tailoring needed.  It is comfy, loose and unstuffy yet looks put together and fancy in a nice everyday sort of way (meaning, it can look just as good paired with jeans and a tank or over a good dress)!  This is why I feel this pattern is a good opportunity to use a really nice fabric.  As much as I try to save those complex or even stunning designs for equally killer fabric, this jacket has convinced me there is another option.  Choose versatile and easy-to-make patterns which both will let the fabric shine and will see more use than that special-occasion-only jacket.  Besides, using a simple design makes things more fail-proof, somewhat…or so we can hope, right?!

Kimono sleeves always make for such an easy bodice assembly, great reach room, and complimentary curving for the shoulders.  Kimono sleeves in the fashion world necessarily have no direct association anymore to the traditional Japanese garment that it uses in its label.  Now a kimono sleeve is commonly meant to designate a sleeve that is drafted as one with the bodice, with no armscye, and a deep taper under the arm that usually ends at the waist.  This double interpretation is so ironic especially since the word “kimono” literally means thing to wear” or “clothing”!  As Kimono sleeves do offer a looser arm and bodice silhouette, they were a frequent feature used in many women’s garments of the 1950s.  This is why a 50’s suit jacket in a strikingly similar green was my main inspiration (as seen on the far left, below) which gave me the gumption to use my precious fabric.  It wasn’t the only one, however, the many other wide lapel, waist closure, kimono jackets and blouse-like wraps of the 50’s I was finding gave me the strong feeling that this is very vintage-inspired, which is why I am including this project in my ongoing blog series “Retro Forward with Burda Style”.  Peplums, too, were a preferred feature to the 1950’s when exaggerated hips were wanted to contrast visually with the tiny wasp waists women were expected to have.

However, at the same time, as I said, there is a blousiness to this Burda Jacket – a lack of the impeccable body fit that much of the 1950’s was all about.  So – I also see an influence of the 1980s and early 1990s on its style.  Technically, these eras are now over 25 years old, thus as weird as this feels to me, they are vintage now!  Peplums were also a feature of these two eras, most especially the 80’s, but the clothes in general were a lot baggier…even when they were generally fitted.  Suits of that time were not the impeccable outfit that you were supposed to sit pretty in.  They were unassuming and meant to move with you…the feeling I get when wearing this Burda Kimono jacket.  My preliminary inspiration might have been 50’s, but I think the 80’s and 90’s influence wins out here with the shiny, bright, almost neon green of my jacket.

The most challenging part of the jacket was figuring out the closure method for the double-breasted wrap-front waist.  Not that it was really that hard, either.  It’s just that the elastic gathered waist added an element of difficulty.  The waist seam made its own casing for the elastic when you sew it down, so luckily there wasn’t any more bulk than there needed to be and that was pretty simple.  I didn’t want buttonholes to pull on buttons, or snaps that could pop apart, so I used the most basic hook-and-eyes that I had (about ½ inch, large size 3) to make sure the closures wouldn’t get buried among the gathers.  I used the spring of the elastic to work in my favor here, because hook merely has to find the eye and I let go – the elastic pulls it closed for me!  The first inner hooking was easy because I just had to find a comfy fit around my waist, but with the overlapping second hook it was much trickier.  You need to keep a certain amount of the elastic to still stretch between the two closures to make the waistline seem evenly gathered.

I stuck to the casual feel of the jacket and left the inside edges raw and free, to do their own ‘thing’.  My reason for doing so at first was because I decided to add one more project to the sewing contest as well and I only had one more night to get it done.  Nevertheless, the fabric really doesn’t fray that much but for some weird reason, I – the perfectionist herself – actually like the soft, imperfect, and handmade feel of seeing and knowing those seams are left as they are.  Yes, as I said up at the top of my post…this totally is not my normal sewing practices.  You know, though, it feels good to change things up and gain a new perspective!

Making a style you’re unsure towards is hard enough, then to turn it around and actually find a way to have it work for you is a difficult and satisfying thing to achieve.  For a seamstress, taking the time to make a new style, especially when it needs a tricky size adjustment, or using a special fabric which would not be seen otherwise, is both a perk of sewing one’s own wardrobe and a scary challenge because it opens you up to the possibility of either failure or success.  Luckily this project was a victory, but if it wasn’t, I would have worked my way through it because an idea (and a good fabric) is worth it.  Keep those ideas coming everyone and don’t be afraid to make something out of that notion that popped into your head!  Nothing in the sewing world is off limits to have a crack at if you put your mind to trying and succeeding.